Skip to main content
fitnessEvidence: Grade B

Using Your MitoRed MitoPRO 300 for Muscle Recovery Treatment

Published: Last updated:

Device-specific protocol for Muscle Recovery using the MitoRed MitoRed MitoPRO 300 (630/660/830/850nm, 168 mW/cm²)

Your MitoRed MitoPRO 300 Protocol for Muscle Recovery

Wavelengths

630nm, 660nm, 830nm, 850nm

Session Time

1 min

Target Dose

11.5 J/cm²

Distance

6 inches

Frequency

Immediately before or within 2 hours after exercise

Timeline

Acute effects within 24-48 hours post-exercise

Why MitoRed MitoPRO 300 for Muscle Recovery?

The MitoRed MitoRed MitoPRO 300 emits at 630nm and 660nm and 830nm and 850nm, which provides a excellent match for Muscle Recovery treatment. Research for this condition recommends 660nm, 810nm, 850nm.

At 168 mW/cm² irradiance (at the recommended distance of 6 inches), you'll need approximately 1 minutes per session to reach the target dose of 11.5 J/cm². This falls within the recommended range of 3-20 J/cm² for Muscle Recovery.

The MitoRed MitoPRO 300 is a panel device with targeted coverage. For Muscle Recovery, you may need to treat each area separately if the affected zone is larger than the device's coverage.

MitoRed MitoPRO 300 Quick Specs

Price

$399

LEDs

60

Power

120W

FDA

Not registered

Evidence for Muscle Recovery

Red and near-infrared light therapy at 660-850nm reduces exercise-induced muscle damage markers (creatine kinase, LDH) and self-reported soreness when applied pre- or post-exercise. Dose: 3-20 J/cm², 10-20 minutes, within 2 hours of exercise. Evidence grade: B (moderate — consistent findings across multiple studies).

Same Condition, Different Devices

Research Basis

This content is informed by 47+ published peer-reviewed studies on photobiomodulation.