Skip to main content
fitnessEvidence: Grade B

Using Your MitoRed MitoPRO 1500 for Muscle Recovery Treatment

Published: Last updated:

Device-specific protocol for Muscle Recovery using the MitoRed MitoRed MitoPRO 1500 (630/660/830/850nm, 168 mW/cm²)

Your MitoRed MitoPRO 1500 Protocol for Muscle Recovery

Wavelengths

630nm, 660nm, 830nm, 850nm

Session Time

1 min

Target Dose

11.5 J/cm²

Distance

6 inches

Frequency

Immediately before or within 2 hours after exercise

Timeline

Acute effects within 24-48 hours post-exercise

Why MitoRed MitoPRO 1500 for Muscle Recovery?

The MitoRed MitoRed MitoPRO 1500 emits at 630nm and 660nm and 830nm and 850nm, which provides a excellent match for Muscle Recovery treatment. Research for this condition recommends 660nm, 810nm, 850nm.

At 168 mW/cm² irradiance (at the recommended distance of 6 inches), you'll need approximately 1 minutes per session to reach the target dose of 11.5 J/cm². This falls within the recommended range of 3-20 J/cm² for Muscle Recovery.

The MitoRed MitoPRO 1500's full body coverage area makes it suitable for treating larger treatment zones. For Muscle Recovery, position the device at 6 inches from the target area.

MitoRed MitoPRO 1500 Quick Specs

Price

$1,199

LEDs

300

Power

600W

FDA

Not registered

Evidence for Muscle Recovery

Red and near-infrared light therapy at 660-850nm reduces exercise-induced muscle damage markers (creatine kinase, LDH) and self-reported soreness when applied pre- or post-exercise. Dose: 3-20 J/cm², 10-20 minutes, within 2 hours of exercise. Evidence grade: B (moderate — consistent findings across multiple studies).

Same Condition, Different Devices

Research Basis

This content is informed by 47+ published peer-reviewed studies on photobiomodulation.