Skip to main content
wellnessEvidence: Grade C

Using Your Joovv Solo 3.0 for Sleep Quality Treatment

Published: Last updated:

Device-specific protocol for Sleep Quality using the Joovv Joovv Solo 3.0 (660/850nm, 128 mW/cm²)

Your Joovv Solo 3.0 Protocol for Sleep Quality

Wavelengths

660nm, 850nm

Session Time

1 min

Target Dose

6 J/cm²

Distance

6 inches

Frequency

Daily, 30-60 minutes before bedtime

Timeline

1-2 weeks for subjective improvement

Why Joovv Solo 3.0 for Sleep Quality?

The Joovv Joovv Solo 3.0 emits at 660nm and 850nm, which provides a good match for Sleep Quality treatment. Research for this condition recommends 630nm, 660nm.

At 128 mW/cm² irradiance (at the recommended distance of 6 inches), you'll need approximately 1 minutes per session to reach the target dose of 6 J/cm². This falls within the recommended range of 2-10 J/cm² for Sleep Quality.

The Joovv Solo 3.0's half body coverage area makes it suitable for treating larger treatment zones. For Sleep Quality, position the device at 6 inches from the target area.

Joovv Solo 3.0 Quick Specs

Price

$1,495

LEDs

150

Power

200W

FDA

Registered

Evidence for Sleep Quality

Red light at 630-660nm used 30-60 minutes before bedtime does not suppress melatonin production (unlike blue light from screens) and may enhance endogenous melatonin secretion. Dose: 2-10 J/cm², 10-20 minutes. Subjective improvement reported within 1-2 weeks. Evidence grade: C (preliminary — limited controlled studies).

Same Condition, Different Devices

Research Basis

This content is informed by 47+ published peer-reviewed studies on photobiomodulation.