Skip to main content
painEvidence: Grade B

Using Your PlatinumLED BioMax 600 for Joint Pain & Arthritis Treatment

Published: Last updated:

Device-specific protocol for Joint Pain & Arthritis using the PlatinumLED PlatinumLED BioMax 600 (630/660/810/830/850nm, 183 mW/cm²)

Your PlatinumLED BioMax 600 Protocol for Joint Pain & Arthritis

Wavelengths

630nm, 660nm, 810nm, 830nm, 850nm

Session Time

2 min

Target Dose

17 J/cm²

Distance

6 inches

Frequency

Daily during acute pain, 3-5x/week for maintenance

Timeline

2-4 weeks

Why PlatinumLED BioMax 600 for Joint Pain & Arthritis?

The PlatinumLED PlatinumLED BioMax 600 emits at 630nm and 660nm and 810nm and 830nm and 850nm, which provides a excellent match for Joint Pain & Arthritis treatment. Research for this condition recommends 810nm, 830nm, 850nm.

At 183 mW/cm² irradiance (at the recommended distance of 6 inches), you'll need approximately 2 minutes per session to reach the target dose of 17 J/cm². This falls within the recommended range of 4-30 J/cm² for Joint Pain & Arthritis.

The PlatinumLED BioMax 600's half body coverage area makes it suitable for treating larger treatment zones. For Joint Pain & Arthritis, position the device at 6 inches from the target area.

PlatinumLED BioMax 600 Quick Specs

Price

$899

LEDs

200

Power

400W

FDA

Not registered

Evidence for Joint Pain & Arthritis

Near-infrared therapy at 810-850nm reduces knee osteoarthritis pain at rest, confirmed by a 2024 review of 10 studies. Dose: 4-30 J/cm², 10-20 minutes, daily to 5x/week. NIR penetrates 4-5cm to reach joint tissue. Evidence grade: B (moderate — limited large-scale RCTs).

Same Condition, Different Devices

Research Basis

This content is informed by 47+ published peer-reviewed studies on photobiomodulation.