Skip to main content
painEvidence: Grade B

Using Your Joovv Go 2.0 for Joint Pain & Arthritis Treatment

Published: Last updated:

Device-specific protocol for Joint Pain & Arthritis using the Joovv Joovv Go 2.0 (660/850nm, 115 mW/cm²)

Your Joovv Go 2.0 Protocol for Joint Pain & Arthritis

Wavelengths

660nm, 850nm

Session Time

2 min

Target Dose

17 J/cm²

Distance

Direct contact to 3 inches

Frequency

Daily during acute pain, 3-5x/week for maintenance

Timeline

2-4 weeks

Why Joovv Go 2.0 for Joint Pain & Arthritis?

The Joovv Joovv Go 2.0 emits at 660nm and 850nm, which provides a good match for Joint Pain & Arthritis treatment. Research for this condition recommends 810nm, 830nm, 850nm.

At 115 mW/cm² irradiance (at the recommended distance of Direct contact to 3 inches), you'll need approximately 2 minutes per session to reach the target dose of 17 J/cm². This falls within the recommended range of 4-30 J/cm² for Joint Pain & Arthritis.

The Joovv Go 2.0 is a handheld device with targeted coverage. For Joint Pain & Arthritis, you may need to treat each area separately if the affected zone is larger than the device's coverage.

Joovv Go 2.0 Quick Specs

Price

$449

LEDs

18

Power

30W

FDA

Registered

Evidence for Joint Pain & Arthritis

Near-infrared therapy at 810-850nm reduces knee osteoarthritis pain at rest, confirmed by a 2024 review of 10 studies. Dose: 4-30 J/cm², 10-20 minutes, daily to 5x/week. NIR penetrates 4-5cm to reach joint tissue. Evidence grade: B (moderate — limited large-scale RCTs).

Same Condition, Different Devices

Research Basis

This content is informed by 47+ published peer-reviewed studies on photobiomodulation.