Skip to main content
hairEvidence: Grade A

Using Your PlatinumLED BioMax 600 for Hair Loss Treatment

Published: Last updated:

Device-specific protocol for Hair Loss using the PlatinumLED PlatinumLED BioMax 600 (630/660/810/830/850nm, 183 mW/cm²)

Your PlatinumLED BioMax 600 Protocol for Hair Loss

Wavelengths

630nm, 660nm, 810nm, 830nm, 850nm

Session Time

1 min

Target Dose

6 J/cm²

Distance

6 inches

Frequency

3x/week (every other day)

Timeline

12-26 weeks

Why PlatinumLED BioMax 600 for Hair Loss?

The PlatinumLED PlatinumLED BioMax 600 emits at 630nm and 660nm and 810nm and 830nm and 850nm, which provides a good match for Hair Loss treatment. Research for this condition recommends 630nm, 650nm, 660nm.

At 183 mW/cm² irradiance (at the recommended distance of 6 inches), you'll need approximately 1 minutes per session to reach the target dose of 6 J/cm². This falls within the recommended range of 2-10 J/cm² for Hair Loss.

The PlatinumLED BioMax 600's half body coverage area makes it suitable for treating larger treatment zones. For Hair Loss, position the device at 6 inches from the target area.

PlatinumLED BioMax 600 Quick Specs

Price

$899

LEDs

200

Power

400W

FDA

Not registered

Evidence for Hair Loss

Low-level light therapy at 630-660nm is FDA-cleared for androgenetic alopecia, with multiple devices demonstrating statistically significant hair count increases. Dose: 2-10 J/cm², 15-25 minutes, 3x/week for 12-26 weeks. Evidence grade: A (strong — FDA clearance plus multiple RCTs).

Same Condition, Different Devices

Research Basis

This content is informed by 47+ published peer-reviewed studies on photobiomodulation.