Skip to main content
hairEvidence: Grade A

Using Your MitoRed MitoPRO 300 for Hair Loss Treatment

Published: Last updated:

Device-specific protocol for Hair Loss using the MitoRed MitoRed MitoPRO 300 (630/660/830/850nm, 168 mW/cm²)

Your MitoRed MitoPRO 300 Protocol for Hair Loss

Wavelengths

630nm, 660nm, 830nm, 850nm

Session Time

1 min

Target Dose

6 J/cm²

Distance

6 inches

Frequency

3x/week (every other day)

Timeline

12-26 weeks

Why MitoRed MitoPRO 300 for Hair Loss?

The MitoRed MitoRed MitoPRO 300 emits at 630nm and 660nm and 830nm and 850nm, which provides a good match for Hair Loss treatment. Research for this condition recommends 630nm, 650nm, 660nm.

At 168 mW/cm² irradiance (at the recommended distance of 6 inches), you'll need approximately 1 minutes per session to reach the target dose of 6 J/cm². This falls within the recommended range of 2-10 J/cm² for Hair Loss.

The MitoRed MitoPRO 300 is a panel device with targeted coverage. For Hair Loss, you may need to treat each area separately if the affected zone is larger than the device's coverage.

MitoRed MitoPRO 300 Quick Specs

Price

$399

LEDs

60

Power

120W

FDA

Not registered

Evidence for Hair Loss

Low-level light therapy at 630-660nm is FDA-cleared for androgenetic alopecia, with multiple devices demonstrating statistically significant hair count increases. Dose: 2-10 J/cm², 15-25 minutes, 3x/week for 12-26 weeks. Evidence grade: A (strong — FDA clearance plus multiple RCTs).

Same Condition, Different Devices

Research Basis

This content is informed by 47+ published peer-reviewed studies on photobiomodulation.