Skip to main content
painEvidence: Grade B

Using Your MitoRed MitoPRO 1500 for Back Pain Treatment

Published: Last updated:

Device-specific protocol for Back Pain using the MitoRed MitoRed MitoPRO 1500 (630/660/830/850nm, 168 mW/cm²)

Your MitoRed MitoPRO 1500 Protocol for Back Pain

Wavelengths

630nm, 660nm, 830nm, 850nm

Session Time

2 min

Target Dose

23 J/cm²

Distance

6 inches

Frequency

Daily for acute episodes, 3-5x/week for chronic management

Timeline

1-4 weeks

Why MitoRed MitoPRO 1500 for Back Pain?

The MitoRed MitoRed MitoPRO 1500 emits at 630nm and 660nm and 830nm and 850nm, which provides a good match for Back Pain treatment. Research for this condition recommends 810nm, 830nm, 850nm.

At 168 mW/cm² irradiance (at the recommended distance of 6 inches), you'll need approximately 2 minutes per session to reach the target dose of 23 J/cm². This falls within the recommended range of 6-40 J/cm² for Back Pain.

The MitoRed MitoPRO 1500's full body coverage area makes it suitable for treating larger treatment zones. For Back Pain, position the device at 6 inches from the target area.

MitoRed MitoPRO 1500 Quick Specs

Price

$1,199

LEDs

300

Power

600W

FDA

Not registered

Evidence for Back Pain

Near-infrared therapy at 810-850nm may reduce chronic lower back pain when used as part of a multimodal approach. Higher doses (6-40 J/cm²) are needed due to deep paraspinal tissue targets. Sessions: 15-30 minutes, daily to 5x/week, with relief typically within 1-4 weeks. Evidence grade: B (moderate).

Same Condition, Different Devices

Research Basis

This content is informed by 47+ published peer-reviewed studies on photobiomodulation.